Shirtdresses are one of our favorite summertime makes here at SN HQ. And today, you have many design options, including Megan Nielsen’s Darling Ranges Dress. In flowy or more structured fabrics, this dress is an indie fave, with its modern yet feminine take on the shirtdress. Grab the pattern and join us for a sew along…starting right now! Today, Megan is sharing her tips for perfect sleeve insertion; next week, we’ll tackle pockets and attaching the skirt. Take it away, Megan!
Today we’re going to be inserting our sleeves in the Darling Ranges dress. We’ll be using the inset sleeve method.
This method of sleeve insertion will come in handy when sewing my Darling Ranges dress pattern, Sudley dress and blouse pattern or Dove blouse pattern. In this method, I use a single row of basting stitches, which I sew right on top of when setting the sleeve. Please note that some people prefer to sew two lines of basting stitches, one on either side of the final seam line and still others prefer to skip basting all together, and use strategic pinning to distribute the sleeve cap ease. All of those methods are perfectly valid, and you should choose the one that works best for you.
And if you’re wondering why you need sleeve cap ease at all, the reason is simple: it allows the sleeve to conform to your body better. Most patterns include a lot of sleeve cap ease, anything from 1″ to 2″. To be honest, I think that’s why most people find inserting sleeves challenging and frustrating. Too much sleeve cap ease is a pain to work with and I don’t think there is any benefit in it. For my patterns I prefer to include minimal ease, 1/2″-1″ depending on the pattern. I find it is easier to sew and provides ample room for comfort and movement.
Ready for some sleeve action? Lets do it!
Fold the sleeves in half with right sides facing each other and sew 5/8″ (1.5cm) from the raw edge.
Neaten the raw edge using either a serger/overlocker or zig zag stitch, and press either open or towards the back.
Set your sewing machine to the longest stitch length and sew a line of stitches between the notches on either side of the sleeve cap indicated on the pattern, roughly 5/8” (1.5cm) from the raw edge. Do not back stitch, and ensure that you leave the threads loose.
This line of basting will aid in easing the sleeve cap into the sleeve opening.
Place the sleeve inside the arm hole and match up the side seams with right sides facing. Align the sleeve cap notch with the shoulder seam. The notches on the sleeves should be aligned with the notches on the bodice pieces.
When inserting the sleeve, be careful that the sleeve is the right way round. The front of the sleeve includes single notches, whereas the back of the sleeve includes double notches.
Pin the sleeve to the blouse adjusting the ease at the sleeve cap as necessary by pulling on the loose threads from your ease stitches.
Sew the sleeve to the garment 5/8” (1.5cm) from the raw edge.
Neaten the seam edges using your serger/overlocker or a zig zag stitch, and press the seams toward the inside of the sleeve.
Repeat this for the second sleeve.
Don’t forget to check whether any of your basting stitches are visible from the right side of the garment. Remove the basting stitches if visible from the right side of the garment by carefully unpicking.
That’s it my dears! You have set a sleeve!
Here’s a few last things I’d like to mention about setting sleeves:
Do not panic. If it’s not going well remember that you can unpick it and start again. If there is a section of your sleeve that is a little bumpy or you’ve caught too much fabric, remember that you can unpick just that section and redo it.
Pay attention to notches! The front and back of a sleeve are different, and you’re going to have a devil of a time trying to set in a sleeve backwards (plus it will be uncomfortable to wear).
Different fabrics respond differently. Some ease in better, and others don’t. Sometimes it’s the fabrics fault not yours (can’t we always say it’s the fabrics fault?! hehe). If you’re having trouble getting the sleeve to ease in smoothly with a single row of basting, try using two rows to gain more control.
There are other ways to set sleeves. The flat method is quite common in manufacturing, and in knit sewing, but is also perfectly suited to sewing woven sleeves at home. Personally I like to swap between setting a sleeve in the round (as shown in this tutorial) and setting a sleeve flat, just to stop myself from getting bored of one method.
Thanks so much for the tips and encouragement, Megan!
There’s still time to join the sew along! Grab the pattern over at shopsewitall.com and join us next week for steps covering the pockets and attaching the skirt.